(Photo credit: CMG)

Recycling technology

CMG: New high precision granulator series G17

| Blow Moulding & Coating | C.M.G. SpA | Cento di Budrio (BO) | Italy

CMG launches a new series of small size beside the press granulators with connotates of high caliber. The very innovative and unique attributes of such new series are several and all contribute to obtaining the highest degree of productivity, regrind quality (homogeneous particle dimensions and absence of dust), efficiency of operation and the best application flexibility. In its standard configuration the G17 granulators are applicable to processes of injection moulding and of blow moulding. In the ET1 or ET2 configuration, they are suitable for extrusion applications. The granulation capacitiy range is from 5 kg/h up to 90 kg/h.

Precision cutting

The new CMG series of G17 granulators is designed to obtain the most homogeneous regrind shape and dimensions, along with little to no presence of dust. One additional very unique benefit of this new line is the ability to produce regrind with very small dimensions. The great advantage of dimensionally small regrind is the possibility to add higher percentages to the virgin material with no influence to the quality of the finished product. Small capacity systems, injection moulding machines or extruders, are equipped with small diameter plastification screws, unable to process granules with dimensions exceeding those of the virgin granule. The G17 granulators produce rigrind which is dimensionally comparable to the virgin pellet.

Performance charcteristics

Another outstanding feature of the G17 is the possibility to configure it with solid type staggered rotor or open type one. Depending on the application, the most adequate rotor configuration is provided. Also, both rotor and stationary blades are adjustable, to obtain the highest level of precision of cut. This latter characteristic confers additional uniqueness to the G17 line.

Ease of maintenance and accessibilty

The entire G17 unit can be accessed, cleaned and put back into operation in a matter of minutes. All parts are accessible with no need for tools and can be cleaned by vacuum.

The quitest of all

The new very specific sound insulation shell of the G17 series is designed to convey the sound waves towards the absorption panels to obtain noise levels well below those industrially acceptable (EN12012-1).

Certified power controls

The G17 models are all equipped with IP55 certified control panels. Also, all CMG grinding systems are certified for compliancy to Industry 4.0.

Wordwide reach

With Headquarters, Factories and Technical Center in Italy and the world’s largest distribution network in the plastics industry, CMG is active worldwide with service and sales centers and localized technical skills. Contact CMG at the following link

www.cmg.it

 






Back