Caps & Closures
cancel
|
Caps & Closures
|
SACMI
|
Imola
|
Italy
Compression Molding
SACMI: COOL+ mold, unmatched efficiency and reliability
Since 2012 the COOL+ mold has become a chosen tool for the SACMI CCM compression press range. It features a dual cooling circuit that reduces cycle times and consequently boosts productivity.
|
Caps & Closures
|
Sacmi
|
Imola (BO)
|
Italy
Compression Technology
Compression Technology by SACMI on show at Plastivision 2020
A SACMI 48SD CCM press designed specifically for the Indian market on show at the Mumbai International Trade Fair (16-20 January 2020). Complete inspection systems, including the latest developments in the SACMI PVS range for preform control, will be showcased alongside it.
|
Caps & Closures
|
Sacmi
|
Imola (BO)
|
Italy
Tethered Caps
Tethered caps, SACMI is four years ahead of market requirements
When the new EU Directive comes into force in 2024, this type of cap will be the Beverage Closures standard. And SACMI already has the solutions that look to the industry's future.
|
Caps & Closures
|
Sacmi
|
Imola
|
Italy
NPE 2018
Technology and design: Sacmi adds value to the US market
Sacmi will be at the NPE fair in Orlando (7-11 May 2018) to present flexible, efficient, lightweight cap and container manufacturing solutions and complete cap-preform design solutions aimed at intercepting new high-added-value markets.
|
Management
|
Coveris Rigid
|
Ravensburg
|
Germany
Caps & Closures
Cap and closure manufacturing expanded to COVERIS RIGID RAVENSBURG
Coveris Rigid has successfully installed two continuous compression moulding lines for cap and closure manufacture in the Ravensburg, Germany plant. The lines have been fully functional since their installation in February of this year, with the plant currently producing a 38 mm cap and a 38 mm…
|
Compression moulding
|
Sacmi
|
Imola (BO)
Compression and total quality control, the Sacmi response to the Indian market
Group soon to take part in the Plastivision fair in Mumbai (19-23 January 2017). Visitors will have a great chance to see the CCM press – the world’s most competitive solution for the production of single-piece caps for CSD, water, hot filling and cold aseptic filling – working in synergy with…
|
Compression moulding
|
SACMI
|
Imola (BO)
COOL+ gives Made-in-Sacmi compression another quality boost!
Able to be installed across the CCM range, this solution reduces cap cooling time and raises productivity by up to 50%.
A solution that sharpens the competitive advantage of cap-making compression technology and reinforces Sacmi’s role as a strategic partner when it comes to making key beverage…
A solution that sharpens the competitive advantage of cap-making compression technology and reinforces Sacmi’s role as a strategic partner when it comes to making key beverage…
|
Compression moulding
|
Sacmi
|
Imola (BO), Italy
Sacmi’s CCM48S is the key player at China Brew & Beverage
The most important international trade show dedicated to the beverage industry, China Brew & Beverage, will take place from September 7 to 10 at the China International Exhibition Centre in Beijing. This trade show is a very significant showcase for all the major technology manufacturers serving…
|
Compression moulding
|
SACMI
|
Imola (BO), Italy
SACMI presents the most competitive compression press for single-piece caps
Designed and developed for the single-piece cap market, the CCM48S offers the most competitive solution for the production of mineral water, hot filling and CAF (cold aseptic filling) caps. Built by the Sacmi Imola Closures & Containers Division, the CCM48S makes 1,200 plastic caps per minute with…
|
Compression moulding
|
Sacmi
|
Imola (Bo), Italy
Sacmi take compression technology to the next level
Sacmi’s goal: to complete the CCM range while, at the same time, taking the compression ‘world’ to unprecedented levels by proposing a machine that can produce 2,000 pieces per minute with a cycle time of 2.4 seconds. This, then, is the CCM 80, which will flank the CCM 48 and 64 models, which have…
|
Compression moulding
|
Sacmi
|
Imola, BO, Italy
Sacmi presents compression technology at Caps & Closures in Brussels
Plastics Caps & Closures is the must-see two-day conference for international leading companies operating in the food & drink business. This year the setting is Brussels where the symposium will be held from 5 to 6 November at the Marriott Hotel. This event offers an ideal opportunity to combine the…
|
Compression moulding
|
Sacmi
|
Imola, BO, Italy
Sacmi at Chinaplas: Fastest compression moulding machine in the world for plastic cap production
Notwithstanding the current market slowdown, SACMI’s Closures&Containers team, international industry leader in the manufacture of complete lines for plastic cap production, has significantly accelerated development and research into state-of-the art technical and technological innovations in order…
Newsletter - Weekly PET Briefing
Stay updated with our weekly newsletter.
See the latest issue here.
Double opt-in process. Please check your email.
comPETence Magazine THREE:21
