(Photo credit: TOMRA)

DRS

TOMRA is ready for the expansion of the deposit return system in Germany from January 2022

| Global themes | TOMRA | Mülheim-Kärlich | Germany

TOMRA, the international market leader for reverse vending machines, expects a significant boost to Germany’s circular economy in the new year.

From January 2022, Germany’s deposit return system will expand to include alcoholic and milk-based mixed drinks and juices sold in one-way plastic packaging and cans. This will result in greater transparency for consumers, since up until recently, the system (set up in 2003) has included a special provision which exempts these beverages from the mandatory deposit. The expansion is expected to result in the collection of approximately 85 000 tonnes of additional plastic and aluminium, with the total volume of packaging returned to reverse vending machines increasing to some 500 000 tonnes. 

According to Deutsche Pfandsystem GmbH (DPG), the system’s operator, the overall return rate for disposable packaging in Germany is 98 percent. This not only means that there is much less refuse on roads and in forests but, more importantly, has made it possible to create a circular economy. Over 40 percent of the one-way bottles which are returned are now made from recyclate. This processed plastic can undergo the production process many times, replacing crude oil as a raw material. In its directive on single-use plastics (SUP), the EU has specified incorporation of only 25 percent of recycled plastic in PET bottles by 2025, with the objective of promoting closed material cycles to the greatest extent possible. Latvia, Slovakia, Romania, Turkey, Greece, Malta, Portugal, Ireland, and Scotland have responded to this legislation by passing regulations to create deposit systems for plastic packaging either next year or the year after (see map).

“The introduction of the mandatory deposit system in Germany has been a huge success and is now a global model,” says Volker Rehrmann, TOMRA Executive Vice President and head of the Recycling/Mining & Circular Economy division, headquartered in Mülheim-Kärlich, Germany. “Its expansion will result in new types of materials entering the system, which we will be able to sort and return to the circular economy via the relevant recycling processes just as successfully as we do with the PET used to manufacture bottles for mineral water.”

As an innovation leader, TOMRA achieves a return rate of almost 100% with its cutting-edge reverse vending machines. The result? An exemplary environmental footprint and significantly more raw materials entering the recycling loop. The higher the proportion of recycled materials, the less crude oil is required to produce new products, and the lower CO2 emissions are.

 

www.tomra.com

 






Back