16.03.2017 | BERICAP | Budenheim | Germany

Markets, Caps & Closures, 16.03.2017

BERICAP presents innovative products at Interpack 2017

Hall 10, Stand E-67

BERICAP will be one of the exhibitors at this year's Interpack trade fair in Düsseldorf, where it will be presenting ground-breaking technologies, integrated solutions and innovations tailored to individual packaging requirements.

Over the more than 180 m² of its stand E 67 in hall 10, BERICAP, the global manufacturer of plastic closures, will be showcasing new packaging solutions, such as the e-smoCapTM for e-liquids, alongside advances in its tried-and-tested closure solutions for canisters, metal packages, pesticides, lubricants, sauces & dressings, edible oil, food and beverages.

Innovative ideas are born of the increasingly high requirements made of packaging and, more particularly, the closure. Depending on the area of use, the latter must not only ensure that the container is closed and tightly sealed, but also protect its contents against product piracy whilst complying with high official technical safety standards.

Product safety

In order to guarantee product safety and quality, the assembly of all BERICAP closures is fully automated and process-controlled on state-of-the-art machines.

Closures for Beverages

Conserving resources by lighter and more economical packaging and innovative closures

At Interpack, BERICAP will be introducing types of closure that surpass the usual standards. Examples include closures that combine the desire for consumer satisfaction – such as good grip – with optimised material usage.

This is particularly true for closures not only for still water, but also for beverages for aseptic fill and hot fill applications. BERICAP will be presenting new closures for the carbonated beverage market as well.

BERICAP has also optimised its product portfolio in the area of sports caps and valves and will be presenting new ideas and applications. 

Here is a small preview:

Lightweight yet user-friendly closure solutions for still water: BERICAP HexaLite® 26 and 29 mm

The emphasis in the past has been on reducing the weight of closures, particularly in the food and beverage sector. Cost savings and an improved carbon footprint were a priority, whilst consumer convenience was not taken into account.

BERICAP initially developed lightweight closures in response to market demand.

Developing new closures for a new light 29/25 or 26/22 PET neck resulted in weight savings for closure and neck of 33% compared to their predecessors.

However, the new closures were low in (grip)height – only 11 and 10.5mm – making it awkward for the consumer to open the closures.

As a consequence BERICAP developed closures for the 26mm and 29mm PET neck which are higher and allow convenient opening due to a good grip height. In addition, the lightweight necks were maintained and the little added weight to achieve a higher closure was insignificant.

The new caps are virtually the same weight but look more substantial and are now easier for customers to handle.

All HexaLite® closures have a cut and folded TE band rip that breaks easily the first time the bottle is opened. N2 dosing is feasible.

The 29/25 and 26/22 neck types are approved by CETIE.

Greater grip height for easier handling:
HexaLite 26/13 SFB 3T
HexaLite 29/13 SFB 3T

New BERICAP Sports Closure Thumb’Up Crystal

Bericap has developed a new 2-piece sports closure, allowing a 2-colour look with a transparent PP shell and a coloured HDPE pourer section.

The new sports closure is designed with a tear strip, offering tamper evidence functionality for the over-cap, but it will also be available in bridge-only form – just break the bridges by moving the over-cap upward with the thumb.

The reactive Double Galileo hinge allows an opening angle of 180°, so that the over-cap no longer comes into contact with the cheeks. The hinge is compliant with BSDA safety standards.

Thumb’Up Crystal is available for the PCO 1881 and the 29/25 neck.

BERICAP’s New Sports Closure Thumb’Up Crystal

BERICAP closure for e-cigarette refill sets

BERICAP’s e-smoCap™

BERICAP has developed the e-smoCap™, a childproof closure that makes it easier for millions of people throughout Europe to refill their e-cigarettes.

The closure has ISO 8317 CRC certification from the Laboratoire National d'Essais, which is supervised by the French government. A sealing strip ensures that it is tamper-proof, thus providing protection and security for end consumers. There is a long, narrow drip nozzle inside the closure for easy refills.

Of course, it is also possible to conceive of other applications for this product in which precision dosing is of paramount importance.

Protection against product piracy

Tamper protection: Security label with QR Code and hologram across the guarantee strip.

Product piracy and the accompanying product counterfeiting are sensitive problems with serious consequences when it comes to chemicals of high value, especially in the agricultural sector.

In order to protect refills from being adulterated or tampered, all closures have a folded and slit tamper evidence band (TE) which is extremely difficult to manipulate and provides visual evidence in the form of broken bridges if the closure has been opened.

Other safety options are customer-specific closure designs, possibly complemented by an additional security label fixed across the closure body and TE band, or the use of laser technology enabling, for example, the company name to be lasered across the TE band and closure, even on uneven surfaces. 

Laser Printing

Closure with side laser print for counterfeit protection

BERICAP has developed a special counterfeit protection system using a Laser Print where e.g. a logo can be printed on the side of the closure including the closure body and the TE band. Printing on uneven surfaces is no problem. As soon as the closure is opened, the security strip breaks and the logo is "destroyed", making it obvious that the bottle has already been opened. 

BERICAP will be showing this and other innovative ideas at its stand. 


Photos: BERICAP

PETnology Europe 2017


Munich, 11-12 September, at Drinktec
ICM, International Congress Center

More information >>
Agenda >>
Download Brochure >>
Registration (Early Bird Rate) >>

Newsletter