Method Products converts three product lines to 100% PCR PET bottles from Amcor PET Packaging
Method Products converts three product lines to 100% PCR PET bottles from Amcor PET Packaging
Back

Amcor's PCR PET bottles chosen for first 100% PCR application

6:10 min Bottle development and design
Ann Arbor, MI, USA

   Method Products, Inc., San Francisco, CA has converted three of its U.S. product lines (9 SKUs) to 100% post consumer recycled (PCR) polyethylene terephthalate bottles from Amcor PET Packaging. The conversions, which affect 28-, 25- and 12-ounce bottles, are thought to represent the first 100% PCR applications in the United States for household cleaning products. The company had previously been using 100% virgin PET resin for these bottles.By converting to 100% PCR on the 28-ounce bottle the carbon footprint was reduced by a significant 60 percent or 63.14 kilograms of carbon dioxide equivalent (CO2e) per thousand containers produced. (CO2e is the internationally recognized measure of greenhouse emissions.) When the same bottle was produced in virgin PET, emissions were 104.67 kg CO2e per thousand.Method Products was founded in 1999 on a strong environmental platform which includes the use of biodegradable ingredients in its formulations and “most readily” recyclable packaging for its containers. The introduction of Method’s 100% PCR bottles, once again, redefines the cleaning products category with an even stronger sustainability position. The product lines affected are method’s 28-ounce All Purpose Cleaners (lavender, pink grapefruit and cucumber) and daily shower spray (ylang ylang); 25-ounce floor cleaners (lemon ginger and wood for good), and 12-ounce surface cleaners (daily granite, stainless steel and wood for good polishes). “Because we had been successful with 100% PCR bottles in the U.K., we wanted to explore what could be done in the U.S.,” explains Jason Crouch, director of procurement, method. However, unlike the European supply infrastructure which is more vertically integrated, obtaining a consistent supply of PCR flake suitable for blow molding PET bottles has not been established in the United States.“When method came to us last year on this project, we were hoping to get to 50% PCR content. In our trials, we tested 10-, 25, 50-, 75- and 100%. That’s when we discovered that 100% PCR content was not out of the question, but we knew we had a lot of work ahead of us before we could be confident that the bottles meeting all of the criteria could be produced at commercial rates,” says Greg Rosati, business director, personal care, Amcor. The first challenge was finding a suitable supply source. This meant identifying a company that could source a supply stream with the right characteristics and be able to repelletize the flake so that it could be used to produce bottles. “Ideally, you want the original PET bottles not to have been commingled with any other plastic type. The best source from a material purity standpoint is PET carbonated soft drink bottles that have been collected from a deposit-based program. Second best are bottles that have been curbside collected,” Rosati says. “Additionally, we needed to tap into a company that could provide the desired material quality on a consistent basis and who also has the technology to create pellets from the flake that results when these bottles are ground up.” On the processing side of things, multiple obstacles needed to be overcome. For example, PCR has a much lower intrinsic viscosity (IV) than virgin resin. Since the resulting PET molecular chains are shorter, Amcor had to relearn how to process the material. Additionally, the gray and blue scale color readings had to be at a certain level or the material would not be able to produce a clear bottle. (Five of the SKUs using 100% PCR are in clear PET bottles; colorants are used for the rest.) “method and Amcor engineers worked cooperatively with each other to overcome each of the material, production and performance challenges that presented themselves throughout the project,” Crouch says. The project started last June with trials taking place between August and November. Full scale production took place in December. (Bottles are stretch blow molded at Amcor’s state-of-the-art Nicholasville, KY plant.) Product starting making its way onto retail shelves in February. “Not only has this been a learning experience for both Amcor and method, but resin suppliers have also benefited. The end result is a bottle that is having a positive impact to the environment,” Crouch says. method was founded by Eric Ryan and Adam Lowry. They had met in high school and later became roommates in San Francisco. In 1999, Ryan came up with an idea. He had experience in style and branding, and he mentioned that he was thinking about introducing design to the home care industry. And he just so happened to have met a talented local graphic artist willing to work for deferred pay. Lowry was a chemical engineer from Stanford University with a degree in environmental science. He realized that he could use his expertise to create naturally-derived, biodegradable formulas for the products Ryan had in mind. And method was born. For more information visit: www.methodhome.com. Amcor PET Packaging's Diversified Products division has been established to help consumer products companies achieve innovation, speed-to-market and product differentiation. The business unit focuses on bringing unique packaging solutions to market segments such as personal care, food and liquor.

 

Latricia Fry 

Phone: +1 734 302-2802

Phone: +1 800 666 7741

latricia.fry@amcorpet.com

/

   

Method Products, Inc., San Francisco, CA has converted three of its U.S. product lines (9 SKUs) to 100% post consumer recycled (PCR) polyethylene terephthalate bottles from Amcor PET Packaging. The conversions, which affect 28-, 25- and 12-ounce bottles, are thought to represent the first 100% PCR applications in the United States for household cleaning products. The company had previously been using 100% virgin PET resin for these bottles.

By converting to 100% PCR on the 28-ounce bottle the carbon footprint was reduced by a significant 60 percent or 63.14 kilograms of carbon dioxide equivalent (CO2e) per thousand containers produced. (CO2e is the internationally recognized measure of greenhouse emissions.) When the same bottle was produced in virgin PET, emissions were 104.67 kg CO2e per thousand.

Method Products was founded in 1999 on a strong environmental platform which includes the use of biodegradable ingredients in its formulations and “most readily” recyclable packaging for its containers. The introduction of Method’s 100% PCR bottles, once again, redefines the cleaning products category with an even stronger sustainability position.

The product lines affected are method’s 28-ounce All Purpose Cleaners (lavender, pink grapefruit and cucumber) and daily shower spray (ylang ylang); 25-ounce floor cleaners (lemon ginger and wood for good), and 12-ounce surface cleaners (daily granite, stainless steel and wood for good polishes).

“Because we had been successful with 100% PCR bottles in the U.K., we wanted to explore what could be done in the U.S.,” explains Jason Crouch, director of procurement, method.

However, unlike the European supply infrastructure which is more vertically integrated, obtaining a consistent supply of PCR flake suitable for blow molding PET bottles has not been established in the United States.

“When method came to us last year on this project, we were hoping to get to 50% PCR content. In our trials, we tested 10-, 25, 50-, 75- and 100%. That’s when we discovered that 100% PCR content was not out of the question, but we knew we had a lot of work ahead of us before we could be confident that the bottles meeting all of the criteria could be produced at commercial rates,” says Greg Rosati, business director, personal care, Amcor.

The first challenge was finding a suitable supply source. This meant identifying a company that could source a supply stream with the right characteristics and be able to repelletize the flake so that it could be used to produce bottles.

“Ideally, you want the original PET bottles not to have been commingled with any other plastic type. The best source from a material purity standpoint is PET carbonated soft drink bottles that have been collected from a deposit-based program. Second best are bottles that have been curbside collected,” Rosati says. “Additionally, we needed to tap into a company that could provide the desired material quality on a consistent basis and who also has the technology to create pellets from the flake that results when these bottles are ground up.”

On the processing side of things, multiple obstacles needed to be overcome. For example, PCR has a much lower intrinsic viscosity (IV) than virgin resin. Since the resulting PET molecular chains are shorter, Amcor had to relearn how to process the material. Additionally, the gray and blue scale color readings had to be at a certain level or the material would not be able to produce a clear bottle. (Five of the SKUs using 100% PCR are in clear PET bottles; colorants are used for the rest.)

“method and Amcor engineers worked cooperatively with each other to overcome each of the material, production and performance challenges that presented themselves throughout the project,” Crouch says.

The project started last June with trials taking place between August and November. Full scale production took place in December. (Bottles are stretch blow molded at Amcor’s state-of-the-art Nicholasville, KY plant.) Product starting making its way onto retail shelves in February.

“Not only has this been a learning experience for both Amcor and method, but resin suppliers have also benefited. The end result is a bottle that is having a positive impact to the environment,” Crouch says.

method was founded by Eric Ryan and Adam Lowry. They had met in high school and later became roommates in San Francisco. In 1999, Ryan came up with an idea. He had experience in style and branding, and he mentioned that he was thinking about introducing design to the home care industry. And he just so happened to have met a talented local graphic artist willing to work for deferred pay.

Lowry was a chemical engineer from Stanford University with a degree in environmental science. He realized that he could use his expertise to create naturally-derived, biodegradable formulas for the products Ryan had in mind. And method was born. For more information visit: www.methodhome.com

Amcor PET Packaging's Diversified Products division has been established to help consumer products companies achieve innovation, speed-to-market and product differentiation. The business unit focuses on bringing unique packaging solutions to market segments such as personal care, food and liquor.

Latricia Fry 
Phone: +1 734 302-2802
Phone: +1 800 666 7741
latricia.fry@amcorpet.com
PETnology's Resource Guide
comPETence center

The comPETence center provides your organisation with a dynamic, cost effective way to promote your products and services.

Find out more

Cover
Our premium articles
comPETence
magazine

Find our premium articles, interviews, reports and more
in 3 issues in 2023.

Find out more
Current issue