Injection-compression molding technology for prefroms

XTREME, injection-compression moulding technology

Created by Franco Porracin | | TWO:17 | Vittorio Veneto | Italy

XTREME, injection-compression molding technology, can produce preforms that are up to 8% lighter than even the lightest injection molded preform—but without compromising on any key properties. More weight can be shaved off the body and base of the preform than ever before. The technology takes the shackles off developers’ freedom to create new and unique designs, and it is also easy to integrate into other systems, upstream and downstream.






Back


Injection-compression molding technology for prefroms

XTREME, injection-compression moulding technology

Created by Franco Porracin | | TWO:17 | Vittorio Veneto | Italy

XTREME, injection-compression molding technology, can produce preforms that are up to 8% lighter than even the lightest injection molded preform—but without compromising on any key properties. More weight can be shaved off the body and base of the preform than ever before. The technology takes the shackles off developers’ freedom to create new and unique designs, and it is also easy to integrate into other systems, upstream and downstream.






Back

MATERIAL TECHNOLOGY


Injection-compression molding technology for prefroms

XTREME, injection-compression moulding technology

Created by Franco Porracin | | TWO:17 | Vittorio Veneto | Italy

XTREME, injection-compression molding technology, can produce preforms that are up to 8% lighter than even the lightest injection molded preform—but without compromising on any key properties. More weight can be shaved off the body and base of the preform than ever before. The technology takes the shackles off developers’ freedom to create new and unique designs, and it is also easy to integrate into other systems, upstream and downstream.






Back

PREFORM MOULDING


Injection-compression molding technology for prefroms

XTREME, injection-compression moulding technology

Created by Franco Porracin | | TWO:17 | Vittorio Veneto | Italy

XTREME, injection-compression molding technology, can produce preforms that are up to 8% lighter than even the lightest injection molded preform—but without compromising on any key properties. More weight can be shaved off the body and base of the preform than ever before. The technology takes the shackles off developers’ freedom to create new and unique designs, and it is also easy to integrate into other systems, upstream and downstream.






Back

BLOW MOULDING


Injection-compression molding technology for prefroms

XTREME, injection-compression moulding technology

Created by Franco Porracin | | TWO:17 | Vittorio Veneto | Italy

XTREME, injection-compression molding technology, can produce preforms that are up to 8% lighter than even the lightest injection molded preform—but without compromising on any key properties. More weight can be shaved off the body and base of the preform than ever before. The technology takes the shackles off developers’ freedom to create new and unique designs, and it is also easy to integrate into other systems, upstream and downstream.






Back

FILLING TECHNOLOGY


Injection-compression molding technology for prefroms

XTREME, injection-compression moulding technology

Created by Franco Porracin | | TWO:17 | Vittorio Veneto | Italy

XTREME, injection-compression molding technology, can produce preforms that are up to 8% lighter than even the lightest injection molded preform—but without compromising on any key properties. More weight can be shaved off the body and base of the preform than ever before. The technology takes the shackles off developers’ freedom to create new and unique designs, and it is also easy to integrate into other systems, upstream and downstream.






Back

CAPPING TECHNOLOGY


Injection-compression molding technology for prefroms

XTREME, injection-compression moulding technology

Created by Franco Porracin | | TWO:17 | Vittorio Veneto | Italy

XTREME, injection-compression molding technology, can produce preforms that are up to 8% lighter than even the lightest injection molded preform—but without compromising on any key properties. More weight can be shaved off the body and base of the preform than ever before. The technology takes the shackles off developers’ freedom to create new and unique designs, and it is also easy to integrate into other systems, upstream and downstream.






Back

DECORATION TECHNOLOGY


Injection-compression molding technology for prefroms

XTREME, injection-compression moulding technology

Created by Franco Porracin | | TWO:17 | Vittorio Veneto | Italy

XTREME, injection-compression molding technology, can produce preforms that are up to 8% lighter than even the lightest injection molded preform—but without compromising on any key properties. More weight can be shaved off the body and base of the preform than ever before. The technology takes the shackles off developers’ freedom to create new and unique designs, and it is also easy to integrate into other systems, upstream and downstream.






Back

CONVEYING & TRANSPORTATION


Injection-compression molding technology for prefroms

XTREME, injection-compression moulding technology

Created by Franco Porracin | | TWO:17 | Vittorio Veneto | Italy

XTREME, injection-compression molding technology, can produce preforms that are up to 8% lighter than even the lightest injection molded preform—but without compromising on any key properties. More weight can be shaved off the body and base of the preform than ever before. The technology takes the shackles off developers’ freedom to create new and unique designs, and it is also easy to integrate into other systems, upstream and downstream.






Back

RECYCLING TECHNOLOGY


Injection-compression molding technology for prefroms

XTREME, injection-compression moulding technology

Created by Franco Porracin | | TWO:17 | Vittorio Veneto | Italy

XTREME, injection-compression molding technology, can produce preforms that are up to 8% lighter than even the lightest injection molded preform—but without compromising on any key properties. More weight can be shaved off the body and base of the preform than ever before. The technology takes the shackles off developers’ freedom to create new and unique designs, and it is also easy to integrate into other systems, upstream and downstream.






Back

Advertisement

Newsletter - Weekly PET Briefing

Stay updated with our weekly newsletter.
See the latest issue here.

You can find our privacy statement here. I agree that my data will be stored for being contacted. I can revoke my consent any time in the future via e-mail to info@petnology.com.

Double opt-in process. Please check your email.


Advertisement

comPETence Magazine THREE:20

Preform Moulding


Injection-compression molding technology for prefroms

XTREME, injection-compression moulding technology

Created by Franco Porracin | | TWO:17 | Vittorio Veneto | Italy

XTREME, injection-compression molding technology, can produce preforms that are up to 8% lighter than even the lightest injection molded preform—but without compromising on any key properties. More weight can be shaved off the body and base of the preform than ever before. The technology takes the shackles off developers’ freedom to create new and unique designs, and it is also easy to integrate into other systems, upstream and downstream.






Back


Advertisement

comPETence PLUS

How to get access

As a subscriber of our magazine in print our digital app version you have access to our comPETence PLUS interviews, analyses, essays, viewpoints and technical reports on the website of PETnology.

You are subscriber

User login

Enter your username and password here in order to log in on the website

Sustainability


Injection-compression molding technology for prefroms

XTREME, injection-compression moulding technology

Created by Franco Porracin | | TWO:17 | Vittorio Veneto | Italy

XTREME, injection-compression molding technology, can produce preforms that are up to 8% lighter than even the lightest injection molded preform—but without compromising on any key properties. More weight can be shaved off the body and base of the preform than ever before. The technology takes the shackles off developers’ freedom to create new and unique designs, and it is also easy to integrate into other systems, upstream and downstream.






Back


Blow Moulding & Coating


Injection-compression molding technology for prefroms

XTREME, injection-compression moulding technology

Created by Franco Porracin | | TWO:17 | Vittorio Veneto | Italy

XTREME, injection-compression molding technology, can produce preforms that are up to 8% lighter than even the lightest injection molded preform—but without compromising on any key properties. More weight can be shaved off the body and base of the preform than ever before. The technology takes the shackles off developers’ freedom to create new and unique designs, and it is also easy to integrate into other systems, upstream and downstream.






Back

RECYCLING AND SORTING


Injection-compression molding technology for prefroms

XTREME, injection-compression moulding technology

Created by Franco Porracin | | TWO:17 | Vittorio Veneto | Italy

XTREME, injection-compression molding technology, can produce preforms that are up to 8% lighter than even the lightest injection molded preform—but without compromising on any key properties. More weight can be shaved off the body and base of the preform than ever before. The technology takes the shackles off developers’ freedom to create new and unique designs, and it is also easy to integrate into other systems, upstream and downstream.






Back