From washed flakes to food-grade preforms in a single thermal cycle – Circular Economy Becoming Tangible

SIPA-EREMA-Co-Development XTREME Renew converts post-consumer PET bottle scrap into preforms

| THREE:19 | Interview by Dr. Otto Appel with Antonio Narder, COO, Franco Porracin, Business Unit Director, PET Preform Systems & Tooling, Anna Horecica Csiki, Preform Systems Product Manager, Roberta Gualtieri, Marketing Manager

The first process step (Vacurema by EREMA) converts conventional washed PET bottle flakes into decontaminated food-grade PET melt with increased viscosity (IV). The melt is then, for the second step, fed to the SIPA section of the compact plant, which produces preforms using the injection-compression moulding technology.

What makes it so special: The recyclate goes through only one thermal cycle. According to the codevelopers, the quality of the preforms produced in this way benefits compared to the standard process, in which the recyclate is granulated and then melted again: the yellowing is less, while the transparency increases. SIPA also highlight that XTREME Renew preforms are up to 10% lighter than conventional injection moulded preforms. In addition, XTREME Renew aims to reduce logistics and transportation costs by 20% and total operating costs by 15%.






Back


From washed flakes to food-grade preforms in a single thermal cycle – Circular Economy Becoming Tangible

SIPA-EREMA-Co-Development XTREME Renew converts post-consumer PET bottle scrap into preforms

| THREE:19 | Interview by Dr. Otto Appel with Antonio Narder, COO, Franco Porracin, Business Unit Director, PET Preform Systems & Tooling, Anna Horecica Csiki, Preform Systems Product Manager, Roberta Gualtieri, Marketing Manager

The first process step (Vacurema by EREMA) converts conventional washed PET bottle flakes into decontaminated food-grade PET melt with increased viscosity (IV). The melt is then, for the second step, fed to the SIPA section of the compact plant, which produces preforms using the injection-compression moulding technology.

What makes it so special: The recyclate goes through only one thermal cycle. According to the codevelopers, the quality of the preforms produced in this way benefits compared to the standard process, in which the recyclate is granulated and then melted again: the yellowing is less, while the transparency increases. SIPA also highlight that XTREME Renew preforms are up to 10% lighter than conventional injection moulded preforms. In addition, XTREME Renew aims to reduce logistics and transportation costs by 20% and total operating costs by 15%.






Back

MATERIAL TECHNOLOGY


From washed flakes to food-grade preforms in a single thermal cycle – Circular Economy Becoming Tangible

SIPA-EREMA-Co-Development XTREME Renew converts post-consumer PET bottle scrap into preforms

| THREE:19 | Interview by Dr. Otto Appel with Antonio Narder, COO, Franco Porracin, Business Unit Director, PET Preform Systems & Tooling, Anna Horecica Csiki, Preform Systems Product Manager, Roberta Gualtieri, Marketing Manager

The first process step (Vacurema by EREMA) converts conventional washed PET bottle flakes into decontaminated food-grade PET melt with increased viscosity (IV). The melt is then, for the second step, fed to the SIPA section of the compact plant, which produces preforms using the injection-compression moulding technology.

What makes it so special: The recyclate goes through only one thermal cycle. According to the codevelopers, the quality of the preforms produced in this way benefits compared to the standard process, in which the recyclate is granulated and then melted again: the yellowing is less, while the transparency increases. SIPA also highlight that XTREME Renew preforms are up to 10% lighter than conventional injection moulded preforms. In addition, XTREME Renew aims to reduce logistics and transportation costs by 20% and total operating costs by 15%.






Back

PREFORM MOULDING


From washed flakes to food-grade preforms in a single thermal cycle – Circular Economy Becoming Tangible

SIPA-EREMA-Co-Development XTREME Renew converts post-consumer PET bottle scrap into preforms

| THREE:19 | Interview by Dr. Otto Appel with Antonio Narder, COO, Franco Porracin, Business Unit Director, PET Preform Systems & Tooling, Anna Horecica Csiki, Preform Systems Product Manager, Roberta Gualtieri, Marketing Manager

The first process step (Vacurema by EREMA) converts conventional washed PET bottle flakes into decontaminated food-grade PET melt with increased viscosity (IV). The melt is then, for the second step, fed to the SIPA section of the compact plant, which produces preforms using the injection-compression moulding technology.

What makes it so special: The recyclate goes through only one thermal cycle. According to the codevelopers, the quality of the preforms produced in this way benefits compared to the standard process, in which the recyclate is granulated and then melted again: the yellowing is less, while the transparency increases. SIPA also highlight that XTREME Renew preforms are up to 10% lighter than conventional injection moulded preforms. In addition, XTREME Renew aims to reduce logistics and transportation costs by 20% and total operating costs by 15%.






Back

BLOW MOULDING


From washed flakes to food-grade preforms in a single thermal cycle – Circular Economy Becoming Tangible

SIPA-EREMA-Co-Development XTREME Renew converts post-consumer PET bottle scrap into preforms

| THREE:19 | Interview by Dr. Otto Appel with Antonio Narder, COO, Franco Porracin, Business Unit Director, PET Preform Systems & Tooling, Anna Horecica Csiki, Preform Systems Product Manager, Roberta Gualtieri, Marketing Manager

The first process step (Vacurema by EREMA) converts conventional washed PET bottle flakes into decontaminated food-grade PET melt with increased viscosity (IV). The melt is then, for the second step, fed to the SIPA section of the compact plant, which produces preforms using the injection-compression moulding technology.

What makes it so special: The recyclate goes through only one thermal cycle. According to the codevelopers, the quality of the preforms produced in this way benefits compared to the standard process, in which the recyclate is granulated and then melted again: the yellowing is less, while the transparency increases. SIPA also highlight that XTREME Renew preforms are up to 10% lighter than conventional injection moulded preforms. In addition, XTREME Renew aims to reduce logistics and transportation costs by 20% and total operating costs by 15%.






Back

FILLING TECHNOLOGY


From washed flakes to food-grade preforms in a single thermal cycle – Circular Economy Becoming Tangible

SIPA-EREMA-Co-Development XTREME Renew converts post-consumer PET bottle scrap into preforms

| THREE:19 | Interview by Dr. Otto Appel with Antonio Narder, COO, Franco Porracin, Business Unit Director, PET Preform Systems & Tooling, Anna Horecica Csiki, Preform Systems Product Manager, Roberta Gualtieri, Marketing Manager

The first process step (Vacurema by EREMA) converts conventional washed PET bottle flakes into decontaminated food-grade PET melt with increased viscosity (IV). The melt is then, for the second step, fed to the SIPA section of the compact plant, which produces preforms using the injection-compression moulding technology.

What makes it so special: The recyclate goes through only one thermal cycle. According to the codevelopers, the quality of the preforms produced in this way benefits compared to the standard process, in which the recyclate is granulated and then melted again: the yellowing is less, while the transparency increases. SIPA also highlight that XTREME Renew preforms are up to 10% lighter than conventional injection moulded preforms. In addition, XTREME Renew aims to reduce logistics and transportation costs by 20% and total operating costs by 15%.






Back

CAPPING TECHNOLOGY


From washed flakes to food-grade preforms in a single thermal cycle – Circular Economy Becoming Tangible

SIPA-EREMA-Co-Development XTREME Renew converts post-consumer PET bottle scrap into preforms

| THREE:19 | Interview by Dr. Otto Appel with Antonio Narder, COO, Franco Porracin, Business Unit Director, PET Preform Systems & Tooling, Anna Horecica Csiki, Preform Systems Product Manager, Roberta Gualtieri, Marketing Manager

The first process step (Vacurema by EREMA) converts conventional washed PET bottle flakes into decontaminated food-grade PET melt with increased viscosity (IV). The melt is then, for the second step, fed to the SIPA section of the compact plant, which produces preforms using the injection-compression moulding technology.

What makes it so special: The recyclate goes through only one thermal cycle. According to the codevelopers, the quality of the preforms produced in this way benefits compared to the standard process, in which the recyclate is granulated and then melted again: the yellowing is less, while the transparency increases. SIPA also highlight that XTREME Renew preforms are up to 10% lighter than conventional injection moulded preforms. In addition, XTREME Renew aims to reduce logistics and transportation costs by 20% and total operating costs by 15%.






Back

DECORATION TECHNOLOGY


From washed flakes to food-grade preforms in a single thermal cycle – Circular Economy Becoming Tangible

SIPA-EREMA-Co-Development XTREME Renew converts post-consumer PET bottle scrap into preforms

| THREE:19 | Interview by Dr. Otto Appel with Antonio Narder, COO, Franco Porracin, Business Unit Director, PET Preform Systems & Tooling, Anna Horecica Csiki, Preform Systems Product Manager, Roberta Gualtieri, Marketing Manager

The first process step (Vacurema by EREMA) converts conventional washed PET bottle flakes into decontaminated food-grade PET melt with increased viscosity (IV). The melt is then, for the second step, fed to the SIPA section of the compact plant, which produces preforms using the injection-compression moulding technology.

What makes it so special: The recyclate goes through only one thermal cycle. According to the codevelopers, the quality of the preforms produced in this way benefits compared to the standard process, in which the recyclate is granulated and then melted again: the yellowing is less, while the transparency increases. SIPA also highlight that XTREME Renew preforms are up to 10% lighter than conventional injection moulded preforms. In addition, XTREME Renew aims to reduce logistics and transportation costs by 20% and total operating costs by 15%.






Back

CONVEYING & TRANSPORTATION


From washed flakes to food-grade preforms in a single thermal cycle – Circular Economy Becoming Tangible

SIPA-EREMA-Co-Development XTREME Renew converts post-consumer PET bottle scrap into preforms

| THREE:19 | Interview by Dr. Otto Appel with Antonio Narder, COO, Franco Porracin, Business Unit Director, PET Preform Systems & Tooling, Anna Horecica Csiki, Preform Systems Product Manager, Roberta Gualtieri, Marketing Manager

The first process step (Vacurema by EREMA) converts conventional washed PET bottle flakes into decontaminated food-grade PET melt with increased viscosity (IV). The melt is then, for the second step, fed to the SIPA section of the compact plant, which produces preforms using the injection-compression moulding technology.

What makes it so special: The recyclate goes through only one thermal cycle. According to the codevelopers, the quality of the preforms produced in this way benefits compared to the standard process, in which the recyclate is granulated and then melted again: the yellowing is less, while the transparency increases. SIPA also highlight that XTREME Renew preforms are up to 10% lighter than conventional injection moulded preforms. In addition, XTREME Renew aims to reduce logistics and transportation costs by 20% and total operating costs by 15%.






Back

RECYCLING TECHNOLOGY


From washed flakes to food-grade preforms in a single thermal cycle – Circular Economy Becoming Tangible

SIPA-EREMA-Co-Development XTREME Renew converts post-consumer PET bottle scrap into preforms

| THREE:19 | Interview by Dr. Otto Appel with Antonio Narder, COO, Franco Porracin, Business Unit Director, PET Preform Systems & Tooling, Anna Horecica Csiki, Preform Systems Product Manager, Roberta Gualtieri, Marketing Manager

The first process step (Vacurema by EREMA) converts conventional washed PET bottle flakes into decontaminated food-grade PET melt with increased viscosity (IV). The melt is then, for the second step, fed to the SIPA section of the compact plant, which produces preforms using the injection-compression moulding technology.

What makes it so special: The recyclate goes through only one thermal cycle. According to the codevelopers, the quality of the preforms produced in this way benefits compared to the standard process, in which the recyclate is granulated and then melted again: the yellowing is less, while the transparency increases. SIPA also highlight that XTREME Renew preforms are up to 10% lighter than conventional injection moulded preforms. In addition, XTREME Renew aims to reduce logistics and transportation costs by 20% and total operating costs by 15%.






Back

Advertisement

Newsletter - Weekly PET Briefing

Stay updated with our weekly newsletter.
See the latest issue here.

You can find our privacy statement here. I agree that my data will be stored for being contacted. I can revoke my consent any time in the future via e-mail to info@petnology.com.

Double opt-in process. Please check your email.


Advertisement

comPETence Magazine THREE:20

Preform Moulding


From washed flakes to food-grade preforms in a single thermal cycle – Circular Economy Becoming Tangible

SIPA-EREMA-Co-Development XTREME Renew converts post-consumer PET bottle scrap into preforms

| THREE:19 | Interview by Dr. Otto Appel with Antonio Narder, COO, Franco Porracin, Business Unit Director, PET Preform Systems & Tooling, Anna Horecica Csiki, Preform Systems Product Manager, Roberta Gualtieri, Marketing Manager

The first process step (Vacurema by EREMA) converts conventional washed PET bottle flakes into decontaminated food-grade PET melt with increased viscosity (IV). The melt is then, for the second step, fed to the SIPA section of the compact plant, which produces preforms using the injection-compression moulding technology.

What makes it so special: The recyclate goes through only one thermal cycle. According to the codevelopers, the quality of the preforms produced in this way benefits compared to the standard process, in which the recyclate is granulated and then melted again: the yellowing is less, while the transparency increases. SIPA also highlight that XTREME Renew preforms are up to 10% lighter than conventional injection moulded preforms. In addition, XTREME Renew aims to reduce logistics and transportation costs by 20% and total operating costs by 15%.






Back


Advertisement

comPETence PLUS

How to get access

As a subscriber of our magazine in print our digital app version you have access to our comPETence PLUS interviews, analyses, essays, viewpoints and technical reports on the website of PETnology.

You are subscriber

User login

Enter your username and password here in order to log in on the website

Sustainability


From washed flakes to food-grade preforms in a single thermal cycle – Circular Economy Becoming Tangible

SIPA-EREMA-Co-Development XTREME Renew converts post-consumer PET bottle scrap into preforms

| THREE:19 | Interview by Dr. Otto Appel with Antonio Narder, COO, Franco Porracin, Business Unit Director, PET Preform Systems & Tooling, Anna Horecica Csiki, Preform Systems Product Manager, Roberta Gualtieri, Marketing Manager

The first process step (Vacurema by EREMA) converts conventional washed PET bottle flakes into decontaminated food-grade PET melt with increased viscosity (IV). The melt is then, for the second step, fed to the SIPA section of the compact plant, which produces preforms using the injection-compression moulding technology.

What makes it so special: The recyclate goes through only one thermal cycle. According to the codevelopers, the quality of the preforms produced in this way benefits compared to the standard process, in which the recyclate is granulated and then melted again: the yellowing is less, while the transparency increases. SIPA also highlight that XTREME Renew preforms are up to 10% lighter than conventional injection moulded preforms. In addition, XTREME Renew aims to reduce logistics and transportation costs by 20% and total operating costs by 15%.






Back


Blow Moulding & Coating


From washed flakes to food-grade preforms in a single thermal cycle – Circular Economy Becoming Tangible

SIPA-EREMA-Co-Development XTREME Renew converts post-consumer PET bottle scrap into preforms

| THREE:19 | Interview by Dr. Otto Appel with Antonio Narder, COO, Franco Porracin, Business Unit Director, PET Preform Systems & Tooling, Anna Horecica Csiki, Preform Systems Product Manager, Roberta Gualtieri, Marketing Manager

The first process step (Vacurema by EREMA) converts conventional washed PET bottle flakes into decontaminated food-grade PET melt with increased viscosity (IV). The melt is then, for the second step, fed to the SIPA section of the compact plant, which produces preforms using the injection-compression moulding technology.

What makes it so special: The recyclate goes through only one thermal cycle. According to the codevelopers, the quality of the preforms produced in this way benefits compared to the standard process, in which the recyclate is granulated and then melted again: the yellowing is less, while the transparency increases. SIPA also highlight that XTREME Renew preforms are up to 10% lighter than conventional injection moulded preforms. In addition, XTREME Renew aims to reduce logistics and transportation costs by 20% and total operating costs by 15%.






Back

RECYCLING AND SORTING


From washed flakes to food-grade preforms in a single thermal cycle – Circular Economy Becoming Tangible

SIPA-EREMA-Co-Development XTREME Renew converts post-consumer PET bottle scrap into preforms

| THREE:19 | Interview by Dr. Otto Appel with Antonio Narder, COO, Franco Porracin, Business Unit Director, PET Preform Systems & Tooling, Anna Horecica Csiki, Preform Systems Product Manager, Roberta Gualtieri, Marketing Manager

The first process step (Vacurema by EREMA) converts conventional washed PET bottle flakes into decontaminated food-grade PET melt with increased viscosity (IV). The melt is then, for the second step, fed to the SIPA section of the compact plant, which produces preforms using the injection-compression moulding technology.

What makes it so special: The recyclate goes through only one thermal cycle. According to the codevelopers, the quality of the preforms produced in this way benefits compared to the standard process, in which the recyclate is granulated and then melted again: the yellowing is less, while the transparency increases. SIPA also highlight that XTREME Renew preforms are up to 10% lighter than conventional injection moulded preforms. In addition, XTREME Renew aims to reduce logistics and transportation costs by 20% and total operating costs by 15%.






Back