Everything you need for PET
The closed PET cycle under one roof

Can plastic packages be sustainable? Yes, they can, if the process for producing them is resource-economical and if they are kept in a closed cycle. You can achieve both of this with technology from Krones and the services it provides. Starting with material-saving packaging design, then low-energy container production right through to recovery of used plastics: Krones offers PET bottles and other packages a chance for a sustainable, eco-compatible life-cycle – not only once, mind you, but again and again.

Practicably planned and profitably practised

A sustainable beverage factory with a closed PET cycle? As things stand at present, that may still be a vision of the future, but it is definitely within reach, because all the building blocks needed to accomplish this do in fact already exist. And each of them is aimed at rendering sustainable use of resources as simple and profitable as possible.


   

Preforms

In the preform production process, every tenth of a second in cycle time and every tenth of a gram in weight count. And there are plenty of potentials for meaningful savings. To exploit them, two things are necessary: firstly comprehensive knowledge of the properties and the behaviour exhibited by the various preform materials, and secondly a profound insight into the production processes involved – both into preform injection-moulding and into the salient aspects governing subsequent container stretch blow-moulding. You will find both of these in the Krones Group.

MHT AG, a company that has specialised in making PET tools for producing preforms, has been part of the Krones family since 2018. Its performatively excellent high-tech injection-moulding tools

  • image all preform designs and threads in common use;
  • are suitable for almost all machine platforms known on the market;
  • are based on an innovative hot-runner technology developed in-house.

   

Containers

The ideal package offers persuasively attractive pluses in all situations: in the production process and at the point of sale, during transport and finally during recovery as well. Since Krones has signed up to providing holistically conceived solutions, development work on both bottle design and machine technology goes hand in hand. It is only when both these aspects supplement each other to perfection that the best solutions are arrived at – for producers, consumers and the natural environment alike.

The packaging designers from Krones

  • advise clients on design, material, product requirements and technical implementation of packages;
  • optimise existing designs in terms of weight, haptics and line efficiency;
  • possess in-depth expertise in the ecological and economic requirements involved, such as material selection, recyclability or weight optimisation.

A whole bandwidth of different technical solutions can be found in the Krones portfolio for the journey from the preform to the ready-for-sale product. And the innovation process embraced by Krones sees to it that these solutions grow in line with more stringent market requirements and also provide answers to the challenges of tomorrow. One element of crucial importance in this context is the enviro sustainability programme, because it makes sure that any newly developed products, and any upgrades, too, are focused on eco-efficiency and environmental compatibility right from the start. Some topical examples:

Contiform 3 Pro: a stretch blow-moulder series that

  • has been conceived for outstanding energy- and media-efficiency;
  • covers a wide output spectrum;
  • reliably masters a most varied range of process types – on request in one and the same machine;
  • also produces PET bottles made 100 per cent of recyclate.

Contiform 3 Speed: a high-speed stretch blow-moulder that

  • achieves a station output of up to 2,750 containers an hour;
  • produces containers for still water, CSDs, and sensitive products;
  • saves another max. 15 per cent in energy and compressed-air consumption compared to the Contiform 3 Pro.

   

Secondary packaging

When it comes to economising on material, then the paramount focus is often on the beverage containers. But if you take a closer look, you can detect quite a bit of savings potential with the secondary packaging as well.

The Variopac Pro packer offers several options for perceptibly cutting the consumption of shrink film – by upgrades aimed at reducing

  • film thickness down to 25 µm;
  • the amount of film required to be protruding at each side;
  • the amount of film remaining on the reel.

The automatic Dynastretch stretch-wrapper

  • produces extremely stable packs with a film that is a mere 10 µm thick;
  • stretches the film, thus saving all the energy otherwise needed for the shrink-wrap process.

The LitePac

  • is created by wrapping two strapping bands around the containers to be packed – thus saving up to 65 per cent of the material costs incurred for a shrink-pack;
  • consumes up to 90 per cent less energy in production and causes up to 70 per cent less waste than shrink-packs;
  • can be produced in the EvoLite packer at high speeds.
  • The strapping bands are produced from homogeneous raw materials and pose no problems at all during recycling.

   

Recyclate

Buy, drink – and that’s it? Not by a long way! From a consumer’s viewpoint, the lifespan of a PET bottle may seem short. But the bottles themselves know better. After all, they are made of a material with outstanding recycling properties. And that talent can be utilised again and again.

So it is all the more surprising that billions of PET bottles per year are still not being re-used – meaning a gigantic raw-material source is simply lying fallow. The Ellen MacArthur Foundation estimates the value of plastic waste unused today at 80 to 120 billion dollars a year. An enormous potential just waiting to be tapped. And that’s not all: recycling plants turn waste into new products – and can thus make a substantial contribution towards reducing the global littering problem.

The MetaPure recycling systems

  • Recycle PET containers
    • into flakes (on request with direct downstream processing into new products)
    • in different material qualities
    • right up to food-grade PET in line with FDA, EFSA and other certificates
  • Recycle containers made of polyolefins (PO)
    • into flakes
    • in the upcycling approach for high-quality re-use
  • Are available as individual machines – or in the shape of a complete single-sourced recycling plant

News

Downloads

No downloads available

Get in Touch

Krones AG

Krones AG

Böhmerwaldstraße 5
93073 Neutraubling
Germany

Tel: +49 9401 70-0
Fax: +49 9401 70-24 88
info@krones.com
www.krones.com

Contacts

Roland Pokorny
Head of Corporate Communications

Germany
Tel: +49 9401 70-2690
E-Mail
image of

Back