© PETnology/tecPET GmbH
|
|
PETnology Europe 2008 |
| PETnology Europe 2008 |
April 22-23, 2008
Duesseldorf/Neuss |
| 14:00 - 17:00 |
Exhibiton Preparation |
| 19:30 - 22:00 |
Welcome Reception |
| 07:45 - 08:45 |
Registration |
| 08:45 - 09:00 |
Welcome Remarks |
| 09:00 - 10:00 |
Panel discussion: Summit Meeting in PET Packaging
"Challenges of the Converter Market - Today and in the Future"
Participants:
Alpla: Günter Lehner, CEO Technics & Operations
Amcor PET Packaging: William Long, President
Husky: John Galt, President and CEO
Krones : Christoph Klenk, Member of the Executive Board
Nestlé Waters M&T: Klaus Hartwig, Head of PTC Water
Sidel: Paul Holderith, Group Executive Vice President
Zhuhai Zhongfu: Ben Chan, Vice Chairman
Presentation: Representatives of the international trade press
|
| 10:00 - 10:30 |
Coffee Break |
| 10:30 - 11:15 |
Session 1: Market Trends
Consumer Shopping Behavior in Packaging - Structures and Trends within the German Beverage Market
GfK Aktiengesellschaft, Günther Birnbaum
PET around the World: A European Market Perspective
Euromonitor, Peta Conn |
| 11:15 - 12:45 |
Session 2:
PET Packaging: Injection Moulding: Productivity, Quality & Technology
Material Handling Systems For Competitive Preform Productions
Motan GmbH, Detlev Schmidt
Expanding the Market Range for HyPET - New Technology for Low Volume and High Volume Preform Molding Systems
Husky Injection Molding Systems, Laurent Sigler
Higher Preform Quality through a Smart Cycle Time Reduction
Netstal Maschinen AG, Stefan Bock
OPP Barrier Plastic Containers - the Clear Alternative to Glass
Kortec Inc., Paul Swenson |
| 12:45 - 14:00 |
Luncheon |
| 14:00 - 15:30 |
Session 3: Stretch Blow Moulding: Machinery & Technology
Arrival of the “No Bottle“
Sidel, Franck Hancard
Extended Shelf Life: a Dream Come True?
How Functional Barrier PET Can Help Brand Owners Drive the
Extra Mile
Cape Decision, Jean F. Schrurs
Lightweighting of PET Single Serve Containers
Krones AG, Kai Acker, Ulrich Lappe
Status on Performance of Alternative Materials over PET for
Stretch Blow Moulding Applications
SIG Corpoplast GmbH, Frank Haesendonckx
14:00 - 14:45 Workshop 1 Closure Development
The Modern Plastic Closure between Innovation and Lightweighting
Corvaglia Closures, Thomas Anderegg
14:45 - 15:30 Workshop 2 Recycling & Bottle Design
Bottle Design - System Conformity Assessment
Verein PET-Recycling Schweiz, Patrick Geisselhardt |
| 15:30 - 16:00 |
Coffee Break |
| 16:00 - 17:30 |
Session 4: Stretch Blow Moulding: Machinery & Productivity
The New Generation of SIPA‘s Two-Step Equipment
SIPA S.P.A., Alberto Galantini
Innovative Single-Stage Production Method for PET containers
Cypet Technologies, Constantinos Sideris
A Scientifi c Approach to Profi table PET operation
The ZDM Group, Steven Zagarola
Full Sidewall Measurement inside the Blow Moulding Machine as a Tool for Closed-Loop-Control
Agr Europe GmbH, Martin Küstner
16:00 - 16:45 Workshop 3 Packaging Material
Polycarbonate for Packaging
Bayer MaterialScience AG, Dr. Peter Höck
16:45 - 17:30 Workshop 4 Beverage & Food Safety
Strategies for the Control of Non-Intentionally Added Substances in Beverage Bottles
Fraunhofer-Institut für Verfahrenstechnik und Verpackung IVV,
Dr. Frank Welle |
| 17:30 |
GET Together - an invitation by KRONES |
| 08:00 - 08:30 |
Registration |
| 08:30 - 10:00 |
Session 5: Caps & Closures: Developments and Expierence
Sustainability: The New Manufacturing Imperative;
Maximum Performance - Minimum Packaging
Closure Systems International, Wasilios Pegnoglou
New Short Neck Closures for Still and Carbonated Beverages
Bericap GmbH und Co. KG, Lothar Brauer, Germany
Widemouth Closure Market in the US
Silgan White Cap, Mark Hewett
COMPRESSION: An Area of continous improvements Enabling the Introduction of Innovative Closure Design for New Standards and Neck Finishes
Sacmi Imola S.C., Luca Nanetti
08:30 - 09:30 Workshop 5 Overmoulding
PRElactia, preforms for light barrier application by overmoulding
Netstal, Alan Viron
Molmasa, N.N.
Novapet S.A., David González
PDG Plastiques, Francois Desfretier
09:30 - 10:00 Workshop 6 PET Processing & Recycling
New production potential for PET processors with the innovative MRS extrusion technology
Gneuß Kunststofftechnik, Dr. Axel Hannemann
|
| 10:00 - 10:30 |
Coffee Break |
| 10:30 - 12:00 |
Session 6: Trends, Potential and Developments in PET Packaging
Creating Milk Markets for PET Throughout Innovative Resins
Novapet S.A., David González, Marco Leonardi
Optimum Packaging Depends on Product Sensitivity and Shelf Life - PET Bottles Design and Barrier Development
P.E.T. Engineering S.r.I., Dino Zanette, Lisa Stival
Value Creation in PETPackaging with Functional Colourants
Holland Colours N.V., Alies Gonlag
Trends in PET Packaging: Innovation & Differentiation
tecPET innovation GmbH, Claudia Schulte, Dr. Otto Appel
10:30 - 12:00 Workshop 7 Quality Control
Detection of Acetaldehyde in PET Preforms with HERACLES Electronic
Alpha M.O.S. France, Attila Aranyos
Quality Control of Barrier Enhanced Bottles
VLB-Berlin, Roland Folz
High Speed Permeation Package Testing
Systech Instruments Ltd., Brian Cummings |
| 12:00 - 12:30 |
Luncheon |
| 13:30 - 15:00 |
Session 7: New Filling and Bottle Sterilisation Technologies
New Commercial Applications for Cold, Dry Sterilization Using Compact Electron Beams
Advanced Electron Beans, David Icke, Chris Hoemeke
Plasma Sterilization and Barrier Coating of PET by means of Low Pressure Microwave Plasmas
Ruhr-Universität Bochum, AEPT, Michael Deilmann, Prof. Peter Awakovicz
Modern Filling System for Plastic Bottles - Highly Flexible Approach for Varying Beverages, Bottle Shape and Neck Diameters
KHS AG, Marcus Huppmann
The Latest Requirements for Safety in Aseptic Bottling
Serac, Roland Nicolas, Franck Geincheleau |
| 15:00 - 15:30 |
Coffee Break |
| 15:30 - 17:30 |
Session 8: PET Processing & Recycling
PET production plants based on Melt-To-Resin MTR® technology
Uhde Inventa-Fischer GmbH, Heinrich Koch
Innovative PET Sheet Technology: The Bandera Experience
Costruizioni Meccanici Luigi Bandera Spa,
Giulio Canali, Emilio Del Re
Different Solutions for the Designated End Products
EREMA Engineering Recycling Maschinen und Anlagen GmbH, Christoph Wöss
Solid State Polymerization for Bottle-to-Bottle Recycling Applications
Bühler AG, Andreas Christel
New Developments in PET Bottle Washing Plants: Reduction of Water and Energy Consumption
SOREMA division of PERVIERO N.srl, Dario Previero |
| 17:30 |
Farewell Reception |
|
|
|
Organisation & Contact |
 For participants and exhibitors
- Conference Manager:
- Barbara Appel
- b.appel@petnology.com
- Tel: +49 (0941) 870 23 74
- Fax: +49 (0941) 870 23 73
- For speakers
|
|
Upcoming Conferences |
|
|
|
| 2009 |
| 2008 |
| 2007 |
| 2006 |
| 2005 |
| 2004 |
| 2003 |
| 2002 |
|
print page 
